Air drum dryer for drying lightweight materials
The drying technology field of lightweight materials has always been a major problem for China. Due to the characteristics of lightweight materials, there are certain difficulties in drying. Many dryer technologies in China are effectively dry under the re-mechanical working environment. Under this dynamic working atmosphere, light materials are difficult to be effectively dried without loss of materials. Air drum dryers are used for lightweight material drying technology .
Air flow drum drying equipment
Excessive amount of exercise causes the heat exchange airflow in the dryer equipment to suck the material that should not have been sucked out of the dryer. However, if the amount of exercise is too small, the material in the dryer cannot be effectively brought into contact with the surface of the heat exchange air flow. Causes the material not to dry effectively. Huachang Machinery specializes in the drying of lightweight materials, and produces a set of practical and efficient dryer equipment, airflow drum dryer.
The airflow tumble dryer equipment is the reason. Since the heat exchange air stream will suck away the materials, a set of drying equipment that sucks the raw materials is specifically designed, and the speed, direction, mode and temperature of the air flow operation are effectively controlled. Such equipment is widely used by the users in production. Unanimous praise.
News link:
Rotary drum dryers, also known as drum dryers or drum dryers, are the most common and widespread drying equipment used in mining equipment. Suitable for drying metal and non-gold drum dryers
It belongs to the magnetic, heavy and floating concentrates of the ore, the clay of the cement industry and the coal slime of the coal mining industry. It is characterized by high productivity and easy operation. The tumble dryer cylinder is a horizontal rotary cylinder. The inside of the rotary cylinder is welded with various staggered angles from front to back. The rotary kiln body is equipped with different types of fire bricks according to the requirements, and is protected from falling at the feed end. Material is provided with a door circle and spiral copy board. It has the advantages of reasonable structure, excellent production, high output, low energy consumption and convenient operation.
1. The cutting speed of the board divider can be set to high or low.
2. Maximum travel of knife wheel: 600mm.
3. Knife wheel micro-adjustment: 0-2mm.
4. Adjustable lower board knife: 0-50mm.5. Backstop depth adjustable range: 0-150mm, maximum PCB board cutting width: 150mm, maximum PCB board cutting length: 400mm
6. Thickness: 0.2-3.2mm, maximum thickness between V-slots: 0.25-2.0mm
7. Connecting multiple pieces of PCB board in the solder, folding often hurt the line, or will be broken electronic parts, the use of the board splitter can avoid damage, and can improve efficiency and quality.
8. With the walking knife type board splitting machine to divide, can completely reduce the stress, to prevent the cracking of solder joints and parts breakage.
9. Using the upper circular knife under the flat knife method, PCB board to the board splitting machine under the flat knife, switch a step, the upper circular knife moving across to the set point, the PCB board will be cut off and divided, cut off without stripping, the cut is flat.
10. Slitter knife travel can be set at will with the length of the PCB board forward stopping fixed point, stopping fixed point for 0-100-200-300-400mm.
11. Cutter back with cut-off length stopper, according to the different width of the PCB board to do the adjustment, for no V-CUT slot PCB board can also easily cut the board, accurate not oblique cut.
12. Can fine-tune the thickness of various PCB boards, to solve the problem of PCB board V-CUT slot depth.
PCB separator,PCB cutting machine,V-cut pcb separator,V-cut pcb machine
SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com