Chusheng Garbage Truck Technician Shares Driving Skills for Driving Haze Days

Fog day driving, visibility is very low, easy to drive accident, Chu Sheng garbage truck technical commissioner today to share the driving skills

Let's follow friends

1. To horn sound

Friends in the fog should diligently press the horn to voice their position

2. Be sure to remember to turn on the headlights and fog lights

When fog visibility is low, all kinds of lights, such as fog lights, width lights, and double flash lights on the car, must be turned on (except for high beam lights) to remind the front and rear vehicles to avoid evading the lights.

3. Do not overtake the fog

It is forbidden to overtake the moving vehicle in foggy weather. If you find that the vehicle in front of you is driving on the right side, do not blindly walk around. Be sure to consider whether or not this vehicle is facing the opposite side of the vehicle. When you exceed the vehicle parked on the roadside, make sure that it has no intention of starting and if you do not come to the opposite side, you must make a horn in due course and bypass the low speed from the left side.

4 must pay attention to control the speed

When driving a dump truck in the fog, it is necessary to control the speed.

5. Pay attention to adjust the distance at any time

In foggy weather, the visibility is low, and the vehicle distance must be adjusted at any time according to the size and visibility of the fog, so as to ensure that there is a good time for emergency treatment.

6. To clean the window from time to time

Condensation of water vapor on the windshield of the fog can damage the sight of the owner. Remember to use the wiper to remove water vapor and improve the visibility of the line of sight.

7. Garbage trucks do not drive as much as possible

Foggy days have a poor sight line. When driving, if it is a one-way three-lane road, it would be better to be in the middle of the road and not to drive on both sides of the road. Because visibility is low at this time, it is not easy to handle what happens on both sides of the road.

8. Emergency braking needs careful

In fog, emergency braking will make it impossible for the rear vehicle to determine the distance and cause a rear-end collision.

Starch Glue Powder For Honeycomb Cardboard

There are two kinds of paper honeycomb glue powder, one is core strip glue and the other is cover glue.

Basic Features:
Starch Glue Powder for honeycomb cardboard is an adhesive made of natural raw materials, which is non-toxic, tasteless, formaldehyde-free and environmentally friendly. Mainly used for bonding between paper and paper at room temperature.

Features:
1. The speed of the glue on the honeycomb paperboard can reach 25m/min. The rubber roller and the honeycomb paper core draw a very small degree under the high-speed state of the board wire core coating and the honeycomb paper core is evenly glued. The paper and honeycomb paper come out from the last cutter. The core has been napped, and the rate of paper breakage reaches 80%.
2. The color of the glue film formed on the honeycomb paperboard after the glue is dried is the same as the color of the base paper, and there is no color difference. There is no glue color on the edge of the die-cut paperboard. After the glue is dried, the hardness of the film is very high and the stiffness is good. In the core coating state, the cardboard made on the same day can be delivered to the customer overnight.
3. Our company's honeycomb paperboard rubber powder has low alkali consumption and low moisture regain rate. The core coating sizing amount (glue) is 40g/㎡.

Scope of application:
It can fully meet the production of various paper honeycomb equipment and honeycomb paperboard products.

Starch Glue Powder For Honeycomb Cardboard,Honeycomb Cardboard Glue,Honeycomb Cardboard Adhesive,Honeycomb Paperboard Starch Glue

Zhengzhou Enlin Import And Export Trade Co., Ltd , https://www.enlintrade.com