A group of physicists at the State University of Information Technology and Optometry in Petersburg, the Moscow Institute of Physics and Technology and the University of Texas at Austin have developed an unconventional nanowire that can scatter light in a particular direction depending on the intensity of the incident radiation . The results of this study will contribute to the development of flexible optical information processing in telecommunication systems.
As a carrier of electromagnetic radiation, photons have neither mass nor charge. This means that the light is relatively unmanageable, unlike the controllable application of a constant electric field unlike, for example, electrons. However, some devices such as nano-antennas can achieve electromagnetic wave propagation control to some extent.
One area that requires "advanced" light processing is the development of optical computers. In these devices, the information is not carried by the electrons, but by the photons. Using light instead of charged particles can dramatically increase the speed at which information can be transmitted and processed. Achieving this type of computer requires, for example, a particular nano-antenna device that has the characteristic of being manipulatable to some extent by applying a constant electric or magnetic field or by changing the intensity of incident light.
In an article published in the journal Laser and Photonics, the researchers devised a new type of nonlinear nanowire that changes the direction of light scattering according to the intensity of incoming waves (Figure 1). The core of the nanowire proposed in this study is silicon nanoparticles, which produce electron plasmas under stringent laser radiation. The authors have previously demonstrated the possibility of using these nanoparticles for non-linear and ultrafast control of light. The researchers then managed to manipulate part of the light for forward and backward radiation scattering. Now, by changing the intensity of incident light, they have found a way to constrain a scattered light in the desired direction.
240 M3/h Concrete Batching Plants
During the maintenance of the mixing station, the main power supply must be cut off, the door of the distribution cabinet must be locked, and the key should be kept by the electrician.Power cutting and transmission must be operated by electrician.When starting the belt conveyor, mixing host, and other motors, it is necessary to observe whether there are people or other sundry things on the motor, in order to prevent injury or damage to the equipment when starting. When cleaning, it is strictly prohibited to flush the electric motor, electrical switch, solenoid valve and other electrical appliances with water to prevent electric shock and damage to electrical equipment.When the mixer is working, it is forbidden to stand in the discharging area.Non-operators are forbidden to enter the control room, smoking and doing things unrelated to the operation are prohibited.There is no operator in the operating room. Power must be cut off and doors and Windows must be locked before leaving.
Hzs Ready Mix Batching Plant,Hzs Mini Concrete Batching Plant,Hzs Batching Plant,Hzs Belt Conveyor Batching Plant
Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.sdjzcseriesdrumconcretemixer.com