Double Screw Cone Powder Mixer Mixing Machine Blender
Layout Type: Verticle
Additional Capabilities: Drying, Granulating, Coating, Mixing
Operating type: Continuous Operating
Condition: New
Mixing Drum: Circular Groove
Feeding Rate: 0.4-0.6
Diameter of Mixing Materials: 40-3000
Load Factor: 0.4-0.6
Mixing Time: 4-10min
Operating: Cycle Operating
Trademark: WJ
Transport Package: Wooden Case
Specification: DSH 0.3/0.5/1/2-30
Origin: China
HS Code: 8419399010
Layout Type: Verticle
Additional Capabilities: Drying, Granulating, Coating, Mixing
Operating type: Continuous Operating
Condition: New
Mixing Drum: Circular Groove
Feeding Rate: 0.4-0.6
Diameter of Mixing Materials: 40-3000
Load Factor: 0.4-0.6
Mixing Time: 4-10min
Operating: Cycle Operating
Trademark: WJ
Transport Package: Wooden Case
Specification: DSH 0.3/0.5/1/2-30
Origin: China
HS Code: 8419399010
DSH Double Screw Cone Mixer machine equipmentÂ
Description
DSH double screw mixer integrates powder, granule and liquid mixing. The rotation of twin screw mixer is completed by a set of motors and cycloid reducers. With asymmetric mixing by two screws, the stirring range will be expanded and stirring speed will accelerate.
FeatureÂ
1.Homogeneous mixing
2.Short mixing time 5-15 minutes
3.Clean discharge &Â no leftover
4.Central discharge valve:
Electronic, pneumatic, manual (optional)
Ball valve, flap valve, knife gate valve, butterfly valve (optional)
5.Main shaft seal:Stuffing seal and air purge seal
6.Drive:Siemens motor, cycloid or gear reducer
7.Limit/safety switch (optional)
8.Heating/cooling jacket optional)
Helix cone mixer application:
1.Applicable material proportion of the poor, the powder particles are relatively large materials;
2.Suitable for ceramic glaze mixing gentle process, the material particles do not pressure-fed or broken;
3.The heat-sensitive materials will not overheat;
4.In the powder - powder mixing process is very easy to add working conditions or providing a liquid to a plurality of spray outlet means;
5.The bottom valve of dislocation convenient material, since the bottom of the spiral no fixtures, so there is no pressure fed phenomenon
Below Spec for Dry Powder Ribbon Mixer:
| Model | Total Capacity(CBM) | Loading factor | Motor Power(kw) | Dimention(Max diameter*Height)(mm) | Weight(kg) |
| DSH-0.06 | 0.06 | 0.4-0.6 | 1.5 | 630*1451 | 150 |
| DSH-0.1 | 0.1 | 1.5 | 715*1569 | 250 | |
| DSH-0.3 | 0.3 | 2.2 | 920*1960 | 550 | |
| DSH-0.5 | 0.5 | 3 | 1140*2320 | 600 | |
| DSH-1 | 1 | 4 | 1480*2898 | 1200 | |
| DSH-1.5 | 1.5 | 5.5 | 1633*3210 | 1350 | |
| DSH-2 | 2 | 5.5 | 1816*3495 | 1500 | |
| DSH-3 | 3 | 7.5 | 2040*3760 | 2300 | |
| DSH-4 | 4 | 11 | 2250*4425 | 2520 | |
| DSH-6 | 6 | 15 | 2548*4940 | 3000 | |
| DSH-8 | 8 | 18.5 | 2780*5360 | 4500 | |
| DSH-10 | 10 | 22 | 3018*5815 | 5500 | |
| DSH-12 | 12 | 22 | 3204*6100 | 5900 |
Â
 DSH Double Screw Cone Mixer machine equipment
Â
Description
DSH double screw mixer integrates powder, granule and liquid mixing. The rotation of twin screw mixer is completed by a set of motors and cycloid reducers. With asymmetric mixing by two screws, the stirring range will be expanded and stirring speed will accelerate.
FeatureÂ
1.Homogeneous mixing
2.Short mixing time 5-15 minutes
3.Clean discharge &Â no leftover
4.Central discharge valve:
Electronic, pneumatic, manual (optional)
Ball valve, flap valve, knife gate valve, butterfly valve (optional)
5.Main shaft seal:Stuffing seal and air purge seal
6.Drive:Siemens motor, cycloid or gear reducer
7.Limit/safety switch (optional)
8.Heating/cooling jacket optional)
Helix cone mixer application:
1.Applicable material proportion of the poor, the powder particles are relatively large materials;
2.Suitable for ceramic glaze mixing gentle process, the material particles do not pressure-fed or broken;
3.The heat-sensitive materials will not overheat;
4.In the powder - powder mixing process is very easy to add working conditions or providing a liquid to a plurality of spray outlet means;
5.The bottom valve of dislocation convenient material, since the bottom of the spiral no fixtures, so there is no pressure fed phenomenon
Below Spec for Dry Powder Ribbon Mixer:
| Model | Total Capacity(CBM) | Loading factor | Motor Power(kw) | Dimention(Max diameter*Height)(mm) | Weight(kg) |
| DSH-0.06 | 0.06 | 0.4-0.6 | 1.5 | 630*1451 | 150 |
| DSH-0.1 | 0.1 | 1.5 | 715*1569 | 250 | |
| DSH-0.3 | 0.3 | 2.2 | 920*1960 | 550 | |
| DSH-0.5 | 0.5 | 3 | 1140*2320 | 600 | |
| DSH-1 | 1 | 4 | 1480*2898 | 1200 | |
| DSH-1.5 | 1.5 | 5.5 | 1633*3210 | 1350 | |
| DSH-2 | 2 | 5.5 | 1816*3495 | 1500 | |
| DSH-3 | 3 | 7.5 | 2040*3760 | 2300 | |
| DSH-4 | 4 | 11 | 2250*4425 | 2520 | |
| DSH-6 | 6 | 15 | 2548*4940 | 3000 | |
| DSH-8 | 8 | 18.5 | 2780*5360 | 4500 | |
| DSH-10 | 10 | 22 | 3018*5815 | 5500 | |
| DSH-12 | 12 | 22 | 3204*6100 | 5900 |
Â
Â
JIEDA thick film heating body consists of stainless steel thick-film heating pipe, outer protective shell, water inlet and outlet joints, anti-dry thermostat, power cord, etc. It can be fixed on sides, with G1/8 thread diameter connecting orifice.
On the basis of thick film heater, our company developed the stainless steel welding interface Heating Element in order to meet the customers` needs of variety applications, this type of heating element can withstand 0.8 MPa pressure, it is a best choice for coffee machine, instant water heater, industrial water heating equipment and other products.
Core component of Bearing pressure heating element for coffee maker
Stainless steel thick-film heating tubes of ANDETONG® series manufactured by company JIEDA are tubular structures, that allows rapid water flow and instant heat carrying. Under the same conditions, ANDETONG® series has many application advantages, such as large heating area, high heat conduction efficiency (≥98%), rapid thermal response (≥80 ℃~150℃/S), long working life (≥10000 hours) etc..
20mm Stainless Steel Welding Heater
20Mm Stainless Steel Welding Heater,Stainless Steel Welding Heater,Welding Heater,Welding Rod Heater
XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de