Electric Brush Wedge Screen Self-Cleaning Filter for Cooling Tower System

Product structure

 
1.Electric motor
2.Automatic drain valve
3:Screen
4:Cleaning brush
5.Water inlet
6.Water outlet

Product principle
The water flows through the screen and the particles are retained on the inside of the screen of the filter element. The filtered water then flows out through the outlet.

 When the particles accumulated to a certain number and the pressure differential increases to the pre-determined level, the flushing cycle starts. 
It include two steps: First, the automatic drain valve opens on the drainage outlet. Then, electronic motor drives the cleaning brushes which are inside the screen, the solids are expelled through the drain valve.
Filters continue to supply filtered water even during the flushing cycle.The whole working system is controlled by a smart box which has several control modes: pressure differential, time, manual and PLC.

Technical parameters
A single maximum flow capacity is up to 4000m3 / h
Wide filtration range:screens from 4000 to 20 microns
Working pressure(min)≥0.18Mpa
Working pressure(max)≤1.6MPa(customized is available)
Working temperature ≤65ºC
Power supply: 380 v / 50 Hz (Customized is availabel)
Cleaning method: brush type
Adjustable cleaning time: 10-200 seconds

Filter material
Shell: carbon steel, 304 stainless steel, 316L stainless steel
Screen: 304 stainless steel, 316L stainless steel
Brush holder: 304 stainless steel, 316L stainless steel
Drain valve, cast iron,copper,stainless steel,PVC,nylon
Controller: PVC, aluminum
Seal ring: EPDM rubber
Cleaning brush: stainless steel, nylon
 
Loss of pressure table


FL series self-cleaning filter specification table

Packing&Shipping



Company Infomation 



Contact us





 

Product structure

 
1.Electric motor
2.Automatic drain valve
3:Screen
4:Cleaning brush
5.Water inlet
6.Water outlet

Product principle
The water flows through the screen and the particles are retained on the inside of the screen of the filter element. The filtered water then flows out through the outlet.

 When the particles accumulated to a certain number and the pressure differential increases to the pre-determined level, the flushing cycle starts. 
It include two steps: First, the automatic drain valve opens on the drainage outlet. Then, electronic motor drives the cleaning brushes which are inside the screen, the solids are expelled through the drain valve.
Filters continue to supply filtered water even during the flushing cycle.The whole working system is controlled by a smart box which has several control modes: pressure differential, time, manual and PLC.

Technical parameters
A single maximum flow capacity is up to 4000m3 / h
Wide filtration range:screens from 4000 to 20 microns
Working pressure(min)≥0.18Mpa
Working pressure(max)≤1.6MPa(customized is available)
Working temperature ≤65ºC
Power supply: 380 v / 50 Hz (Customized is availabel)
Cleaning method: brush type
Adjustable cleaning time: 10-200 seconds

Filter material
Shell: carbon steel, 304 stainless steel, 316L stainless steel
Screen: 304 stainless steel, 316L stainless steel
Brush holder: 304 stainless steel, 316L stainless steel
Drain valve, cast iron,copper,stainless steel,PVC,nylon
Controller: PVC, aluminum
Seal ring: EPDM rubber
Cleaning brush: stainless steel, nylon
 
Loss of pressure table


FL series self-cleaning filter specification table

Packing&Shipping



Company Infomation 



Contact us





 

Straight Tension Fabric Pop Up Display

Quick Details of our Straight Tension Fabric Pop Up Banners:

Product Name	Size list	Printing tech	MOQ	This item inc	Picture
Straight Tension Fabric Pop Up Banner	Large : Graphic size :5940*2280mm Hardware size:5940*2210mm Medium : Graphic size : 2951*2280mm Hardware size :2951*2210mm Small : Graphic size :2438*2280mm Hardware size :2438*2210mm	Dye sublimation printing ( heat transfer printing )	1 PCS	25mm dia aluminum frame +280g fabric printing banner + LED light (o r halogen lights optional )

Description :

The Formulate graphics are printed in full colour onto durable polyester fabric. The fabric is printed through a process called dye sublimation where the ink is fixed into the weave of the fabric. This means the print will not peel, crack or fade and results in high resolution print to photo quality standard with longer lasting results

You can choose single side printing or double sided ,if single side printing ,the other side will be plain white reverse

It completes with individual 600 D carry bag and box to make it is easy to stock and carry .

30 mm diameter top quality aluminum frame makes it is very strong and durable .You can use them many times and just need to change the graphic banner for tradeshow ,events,meeting ect.

Straight Tension Fabric Displays,Straight Pop Up Display,Straight Fabric Display,Straight Fabric Pop Up Display

Golden Mouth Advertising (H.K)Co.,Ltd. ( Jie Da Advertisement Co.,Ltd) , https://www.advertisingflagbannerss.com