It is suitable for different kinds of PET prefrom. 0.5L, 1L, 1.5L, 2L etc water bottle cap, neck size: 28MM, 30MM, etcÂ
Â
We are professional plastic injection molding machine manufacturer for all kinds of plastic products, Clamping force from 50 to 1800Ton, injection weight from 50 to 10000g. Also we have CE and ISO certification. High quality and reasonable machine.
Â
SPECIFICATION | XY1600PET | |
INJECTION UNIT | Â | |
SCREW DIAMETER | mm | Â 65 Â |
SCREW L/D RATIO | L/D | Â 25 Â |
SHOT VOLUME(THEORETICAL) | cm3 | Â 895 Â |
INJECTION WEIGHT(PS) | g | Â 961 Â |
INJECTION RATE | g/s | Â 384 Â |
INJECTION PRESSURE | MPa | Â 130 Â |
SCREW SPEED | rpm | 134 |
CLAMPING UNIT | Â | |
CLAMP FORCE | KN | 1600 |
OPEN STROKE | mm | 435 |
SPACE BETWEEN TIE BARS(W*H) | mm | 480x480 |
MAX.MOULD HEIGHT | mm | 560 |
MIN.MOULD HEIGHT | mm | 180 |
EJECTOR STROKE | mm | 135 |
EJECTOR FORCE | KN | 70 |
OTHER | Â | |
MAX.PUMP PRESSURE | MPa | 16 |
PUMP MOTOR POWER | kW | 30 |
HEATING POWER | kW | 22.3 |
MACHINE DIMENSION(L*W*H) | m | 5.9x1.6x2.0 |
OILTANK CUBAGE | L | 300 |
MACHINE WEIGHT | t | 6.2 |