Good Price Small Flake Ice Machine Use for Retain Freshness

Higher refrigeration efficiency and lower loss of refrigeration capacity
Automatic flake ice machine adopts the latest vertical evaporator with inner helix ice cutter. In the process of ice making, the water distribution device in ice maker sprays water even on the internal surface of ice maker to frozen in a short time. After ice formed, the helix ice cutter drops down and cut ice. In this method, it makes a full use of evaporator and increase the efficiency of ice making.
High quality, dry and non-caked
The thickness of flake ice which produced by automatic plate ice machine with vertical evaporator is about 1mm to 2mm. The ice shape is irregular flake ice and it has good mobility..
Simple structure and small land area
The series of ice flat has different kinds including fresh water type, seawater type, fixed cold source type, equip cold source by customer, and ice flat machine with cold room. And the daily capacity is ranges from 200kg to 60000kg. Customers can choose suitable machine according to site and different water quality. Compared to traditional ice making machine, it has advantage of small land area and low operation cost (no man for ice harvest)..

Parameters:
Ice output:2500kg/24hrs
Ice bin capacity:500kg
Compressor:American Copeland
Ice machine size:1500*1095*1200mm
Ice bin size:1500*1380*1300mm
Installation space:1500*1380*2500mm
G.W.:520kg
Standard power supply:3P/380V 50HZ
Total power:9.1 KW
Refrigerating capacity:15 KW
Refrigerant:R404A
Cooling type:Air cooling
NOTE
Ice storage room is optional according to customers' request with extra price.






    
Higher refrigeration efficiency and lower loss of refrigeration capacity
Automatic flake ice machine adopts the latest vertical evaporator with inner helix ice cutter. In the process of ice making, the water distribution device in ice maker sprays water even on the internal surface of ice maker to frozen in a short time. After ice formed, the helix ice cutter drops down and cut ice. In this method, it makes a full use of evaporator and increase the efficiency of ice making.
High quality, dry and non-caked
The thickness of flake ice which produced by automatic plate ice machine with vertical evaporator is about 1mm to 2mm. The ice shape is irregular flake ice and it has good mobility..
Simple structure and small land area
The series of ice flat has different kinds including fresh water type, seawater type, fixed cold source type, equip cold source by customer, and ice flat machine with cold room. And the daily capacity is ranges from 200kg to 60000kg. Customers can choose suitable machine according to site and different water quality. Compared to traditional ice making machine, it has advantage of small land area and low operation cost (no man for ice harvest)..

Parameters:
Ice output:2500kg/24hrs
Ice bin capacity:500kg
Compressor:American Copeland
Ice machine size:1500*1095*1200mm
Ice bin size:1500*1380*1300mm
Installation space:1500*1380*2500mm
G.W.:520kg
Standard power supply:3P/380V 50HZ
Total power:9.1 KW
Refrigerating capacity:15 KW
Refrigerant:R404A
Cooling type:Air cooling
NOTE
Ice storage room is optional according to customers' request with extra price.






    

Hydraulic Cylinder Seal Kits

Hydraulic Cylinder seal kit is a collection of seals and other components that are used to replace worn or damaged seals in a hydraulic cylinder. Hydraulic cylinders are commonly used in various applications, such as construction equipment, agricultural machinery, and industrial machinery, to transfer power and perform various mechanical tasks.

Over time, the seals in a hydraulic cylinder can wear out or become damaged, which can lead to leaks, reduced performance, and even failure of the cylinder. A hydraulic cylinder seal kit contains all the seals and other components needed to replace the worn or damaged seals and restore the cylinder's proper functioning.

Typically, a hydraulic cylinder seal kit will contain piston seals, rod seals, wipers, O-rings, backup rings, and other components specific to the particular cylinder being repaired. These components are made of materials such as nitrile, polyurethane, or rubber, depending on the application and the operating conditions of the cylinder.

When replacing seals in a hydraulic cylinder, it is important to choose the correct seal kit for the specific cylinder model and application to ensure proper fit and optimal performance. It is also important to follow proper installation procedures to ensure the new seals are installed correctly and will function as intended.

Hydraulic Cylinder Seal Kits Suppliers,Hydraulic Cylinder Seal Kits Manufacturers,Cross Hydraulic Cylinder Seal Kits,Hydraulic Lift Cylinder Seal Kits,Hydraulic Cylinder Parts Seal Kits

Zhejiang Hanying Technology Co., Ltd. , https://www.hydraulicfactory.com