High Chrome Alloy Dry Sand Suction Mining Slurry Pump

October 19, 2018

  • Model NO.: ZJ
  • Working Pressure: High Pressure Pump
  • Position of Pump Shaft: Horizontal Pump
  • Mounting Height: Suction Centrifugal
  • Usage: Pumps
  • Material: A05 A07 A49
  • OEM: Yes
  • Seal Form: Packing Seal with Expeller Seal
  • Application: Mining, Mineral, Coal Plant, Chemical Plant, etc
  • Solid Diameter: 1mm-400mm
  • Transport Package: Wooden Case
  • HS Code: 8413709990
  • Impeller Number: Single-Stage Pump
  • Influent Type of Impeller: Single Suction Pump
  • Pump Casing Combined: Horizontal Split Pumps
  • Impeller: Closed
  • Discharge Diameter: 65-450mm
  • Factory: Yes
  • Fuel: Electric /Diesel
  • Drive Form: Dcz Zvz CV Crz
  • Duty: Heavy
  • Trademark: Boda
  • Origin: Shijiazhuang

High Chrome Alloy Dry Sand Suction Mining Slurry Pump

Slurry Pump General:
The ZJ(G) series slurry pump, which are created by Shijiazhuang Boda Industrial Pump Co., Ltd, is a new generation anti-wear, energy saving slurry pump. The ZJ(G) series pumps used international advanced solid-liquid two-phase flow theory and were designed using the minimum-wear principle. The flow parts of these pumps are suitable for the flow of state media for it's set shape, which reduces hydraulic loss of eddy and impact, both in pump and along the pipelines; So reduced friction of flow parts, lower noise and vibration of the pump translates into improved hydraulic efficiency.
The ZJ(G) series pumps are cased in hard-alloy which is a high anti-wear and high anti-corrosion impact resistance material, which means the pump will have a longer service life. In addition, this series pumps used an automatic reduced pressure system to avoid liquid leakage.
The ZJ(G) series slurry pumps are widely used in mining, metallurgy, power, coal and building material sectors. The ZJ(G) series pumps are suitable for handling abrasive and corrosive solids-bearing slurry with maximum concentrations of wt. 45% (ash) and wt. 60% (ore).
We have all kinds of ZJ(G) series slurry pumps, all of which can be made of directly driven (DC), directly driven via hydraulic coupling(HC), belt driven, and they can be operated in tandem and parallel positions according to the requirements of the customer.


Slurry Pump Notation:
200ZJ(G)-I-A60(58)
200 Outlet diameter(mm)
ZJ denotes slurry pumps ( ZJL denotes vertical pumps, ZJD-single-case pumps)
(G) High-head (usually can be omitted)
I single stage pump ( II denotes th second stage pump)
A number of vanes of impeller ( A denotes 5 vanes, B--4 vanes, C--3 vanes, D--2 vanes)
60 External diameter of impeller (cm)
58 External diameter of impeller after incision (cm)

Slurry Pump  Application Field:

. Metallurgy and mine: Transport black and colored course-mine, fine-mine and slurry of end-mine, etc.

. Electric power: Transport ash mud&slurry in electric power, etc.

. Coal: Transport various course & fine coal mud, etc.

. Contructional material: Transport various slurry contain mud&sand, etc.

. Chemical industry departments: Transport every kinds of abrasive and corrosive slurry in the
Phosphorus and kalium manufactories, etc.

. Environmental protection: Flue gas desulfuration and transportation of gypsum mortar, etc.


Slurry Pump The superior material & technique of wear-resistant:

Hydraulic adopted hydraulic design, wear abrasion of pump parts can be improved
Effectively. It is most important for the lifetime of pump that if selected material is fit for
The liquid. According to the concrete circumstance of each conditions, our limited
Analyzes seriously its basic wear mechanism & wear regulation, selects suitable serial
A material of wear-resistant & corrosion-resistant or other metal & nonmetal wear-resistant material for wear flow parts so as to combine the operation request of pump
And the select parts best to get super operation benefit.

The wear abrasion is various. Usually serials A material of wear- resistant & corrosionresistant is selected to transport liquid according to its quality,
Grain diameter, corrosive performance, temperature and etc. It is serials antiwear
Material which is introduced and developed by ourselves according to practice
Experience of 50 years. Its hardness is HRC35-68, and has more than 30 types such as type antiwear, type antiwash, type anticorrosion,
Type special acid and etc. They can be selected by customers.

Among others, our company based on the introduced technique, associates with
Internal firstclass colleges and institutes to develop wearresistant alloy cast iron of
A05, A07 and etc. Anti-wear can be enhanced 30% than regular similar materials.
Type Speed Capacity Head NPSH
rpm m³/h m m
300ZJ-I-100A 490/590 758-1826 40.9-65.2 3-4.1
300ZJ-I-95A 490/590 720-1735 36.9-58.8 3-4.1
300ZJ-I-90A 590/730 745-1844 46.2-79.9 3.9-5.7
300ZJ-I-85A 590/730 704-1742 41.2-71.3 3.8-5.6
300ZJ-I-70A 730/980 945-2333 35.5-76.8 3.9-7
300ZJ-I-65A 730/980 877-2166 30.6-66.2 3.7-6.6
300ZJ-I-56A 730/980 588-1568 21.5-46 3.5-5.5
250ZJ-103A 590/730 593-1573 64.6-110.5 2.8-4.3
250ZJ-I-96A 590/730 595-1466 55.2-93.7 3.5-5.5
250ZJ-I-90A 590/730 558-1374 48.5-82.4 3.4-5.3
250ZJ-I-85A 730/980 560-1504 66.8-128.7 3.5-5.5
250ZJ-I-83A 730/980 547-1469 63.7-122.7 3.5-5.5
250ZJ-I-80A 730/980 527-1416 59.2-114 3.4-5.4
250ZJ-I-78A 730/980 514-1380 56.3-108.4 3.2-5.1
250ZJ-I-75A 730/980 447-1480 46.2-97.5 3-4.1
250ZJ-I-73A 730/980 435-1441 43.8-92.4 3-4.1
250ZJ-I-70A 730/980 417-1381 40.2-84.9 2.9-3.9
250ZJ-I-68A 730/980 405-1342 38-80.1 2.7-3.7
250ZJ-I-65A 730/980 445-1249 34.1-71 3-4.5
250ZJ-I-63A 730/980 431-1211 32-66.7 3-4.5
250ZJ-I-60A 730/980 411-1153 29.1-60.5 2.8-4.2
200ZJ-I-85A 730/980 329-907 71-133.7 2.8-5
200ZJ-I-75A 730/980 335-900 50.5-102.9 3-4.5
200ZJ-I-73A 730-980 326-876 47.8-97.5 3-4.5
200ZJ-I-70A 730/980 305-976 43.1-86.4 2.8-3.8
200ZJ-I-68A 730/980 296-948 40.7-81.5 2.8-3.8
200ZJ-I-65A 730/980 350-950 36.4-72 2.5-4.3
200ZJ-I-63A 730/980 339-921 34.2-67.6 2.5-4.3
200ZJ-I-60A 730/980 324-870 30.8-62 2.5-4
200ZJ-I-58A 730/980 313-841 28.8-57.9 2.5-4
150ZJ-I-70A 730/980 139-401 44.3-91.2 2-3
150ZJ-I-65A 730/980 223-600 38.5-75.7 2.5-4
150ZJ-I-63A 730/980 216-582 36.2-71.1 2.5-4
150ZJ-I-60A 730/980 201-550 32.6-63.5 2.5-3.8
150ZJ-I-58A 730/980 194-532 30.5-59.3 2.5-3.8
150ZJ-I-55A 730/980 184-504 27.4-53.4 2.3-3.5
150ZJ-I-58C 730/980 200-596 28.4-61 2-3.2
150ZJ-I-57A 730/980 142-427 29.4-56.3 1.8-2.9
150ZJ-I-50A 730/980 171-460 21-43.1 2.5-3
150ZJ-I-48A 730/980 164-442 19.4-39.7 2.5-3
150ZJ-I-42C 980/1480 199-550 23.8-62.8 2.2-4.5
100ZJ-I-50A 980/1480 119-360 40.2-100.2 2.5-4.5
100ZJ-I-46A 980/1480 109-331 34-84.8 2.3-4.2
100ZJ-I-42A 980/1480 93-275 28.7-70.8 2.5-4
100ZJ-I-39A 980/1480 86-255 24.7-61 2.4-3.8
100ZJ-I-42B 980/1480 64-205 24.7-70.7 1.8-2.8
100ZJ-I-36A 980/1480 86-245 19-49.5 2-3.5
100ZJ-I-33A 980/1480 79-225 16-41.6 1.8-3.2
80ZJ-I-52A 980/1480 71-242 43.4-109.8 2.1-4.3
80ZJ-I-42A 980/1480 86-204 28.1-70.4 2.5-4.2
80ZJ-I-39A 980/1480 80-189 24.3-60.7 2.4-4
80ZJ-I-36A 980/1480 65-190 18.7-51.4 2.5-3.7
80ZJ-I-33A 980/1480 60-174 15.7-43.2 2.3-3.4
65ZJ-I-30A 980/1480 31-79 13.8-34.8 2-3
65ZJ-I-27A 980/1480 28-71 11.2-28.2 1.8-2.7
50ZJ-I-50A 980/1480 38-111 43.8-110.7 3-3.8
50ZJ-I-46A 980/1480 31-94 34.3-85.8 1.4-2.9
50ZJ-I-33A 980/1480 17-54 14.5-42.5 2.9-6
40ZJ-I-17A 1400/2900 4-23 9.1-44.6 2.5-4.5
 


High Chrome Alloy Dry Sand Suction Mining Slurry Pump
High Chrome Alloy Dry Sand Suction Mining Slurry Pump
High Chrome Alloy Dry Sand Suction Mining Slurry Pump
 

Pressure Tank

Pressure Tank,Pressure Water Tank,Stainless Steel Water Tank

Heat Exchanger,Pressure Vessel,Pressure Tank Co., Ltd. , http://www.nsheatexchanger.com

Back to top