Throat Diameter: | 1.5 in (38mm) |
Mounting Type: | Bolt-on |
Nominal Impedance: | 8 Ohm |
Power Capacity: | 140Watts RMS(pink noise signal -12db/OCT) |
Sensitivity(1W/1M): | 109dB |
Frequency Range: | 500Hz-18KHz |
Diaphragm Material: | Titanium |
Voice Coil Diameter | 4 in(99.2mm) |
Voice Coil Material | Copper clad aluminum ribbon wire |
Flux Density: | 1.95T |
Magnet: | NdFeB |
outer diameter: | φ154mm |
Throat Diameter: | 1.5 in (38mm) |
Mounting Type: | Bolt-on |
Nominal Impedance: | 8 Ohm |
Power Capacity: | 140Watts RMS(pink noise signal -12db/OCT) |
Sensitivity(1W/1M): | 109dB |
Frequency Range: | 500Hz-18KHz |
Diaphragm Material: | Titanium |
Voice Coil Diameter | 4 in(99.2mm) |
Voice Coil Material | Copper clad aluminum ribbon wire |
Flux Density: | 1.95T |
Magnet: | NdFeB |
outer diameter: | φ154mm |
IBR Sheets (Rib type Roof Sheet) machines are popular roll forming machines, include all kinds of corrugated roof sheets, related to metal decks, purlins, columns of Pre-Engineering Buildings(PEB)
PEB construction needs a lot of IBR sheets, such as glazing tiles, sinusoid tiles, corrugated wall panels, floor decks, purlins, columns, etc.
Our IBR sheeting machines can be automatic roll forming line, double layers Roll Forming Machine, semi automatic forming machine, the configuration of IBR sheet machine is customized.
Each sheet roll forming machine is made as per customer's sheet profile drawing
ibr Sheet Machine,Ibr Roofing Sheet Machine,High Speed Angle Steel Machine,Angle Steel Forming Machine
Wuxi Jinye Complete Set of Equipment Co.Ltd. , https://www.wxjinyemachines.com