High Strength Filament Winding FRP Pipe
Model NO.: DN200-15000MM
Cross-Section Shape: Round or Square or Customized
Connection Type: Bell Socket or Flanged or Plain End
Design Temperature: -40-2000 Degree
Stiffness: 2500, 5000, 7500, 10000, 20000,or Required
Length: 3-12m
Molding Method: Filament Winding or Hand Lay up
Application: Power Plant
Trademark: ZHONGYI
Transport Package: Seaworthy or Customized
Specification: PN0.1-2.5Mpa
Origin: China
HS Code: 39172900
Model NO.: DN200-15000MM
Cross-Section Shape: Round or Square or Customized
Connection Type: Bell Socket or Flanged or Plain End
Design Temperature: -40-2000 Degree
Stiffness: 2500, 5000, 7500, 10000, 20000,or Required
Length: 3-12m
Molding Method: Filament Winding or Hand Lay up
Application: Power Plant
Trademark: ZHONGYI
Transport Package: Seaworthy or Customized
Specification: PN0.1-2.5Mpa
Origin: China
HS Code: 39172900
High Strength Fiberglass Duct GRP FRP Chimney PipeOur Advantage:
1), Engineers will be sent to your local to guide installation on client's required.
2), In order to save transport cost, JHR company can deliver production line and raw material to project local to produce pipes
3), OEM
4), Maintance and technical support will be supplied any time.
5), ASTM standard
6), Any non man-made damage parts can be supplied by us for free.Â
The Filament Winding Potable Water FRP Pipe takes thermosetting resin as base body, take glass fibre and its products as reinforced material.The process of adding silicon sand will adopts the pheumatic control.In addition ,the high frequency vibrator will be used to densify the silicon sand-adding layer,which can large improve the compactness of the silicon sand-adding layer ,as a result,the ring stiffness of pipe will be also improved effectively and at same time,the phenomenon of dry yarn or no yarn will not exist .The usage of silicon sand-adding device and process can not only improve the quality of pipe a lot but also decrease the cost. Under such case,the products will be strongly competitive in the market.
Typical Dimensions:
| DN | L | 0.6MPa | 1.0MPa | 1.6MPa |
| ( mm ) | ( mm ) | TH ( mm ) | TH ( mm ) | TH ( mm ) |
| 10 | 1800 | 4.6 | 4.6 | 4.6 |
| 15 | 1800 | 4.6 | 4.6 | 4.6 |
| 20 | 1800 | 4.6 | 4.6 | 4.6 |
| 25 | 1800 | 4.6 | 4.6 | 4.6 |
| 32 | 1800 | 4.6 | 4.6 | 4.6 |
| 40 | 6000 | 4.6 | 4.6 | 4.6 |
| 50 | 6000 | 4.6 | 4.6 | 4.6 |
| 65 | 6000 | 4.6 | 4.6 | 4.6 |
| 80 | 6000 | 4.6 | 4.6 | 4.6 |
| 100 | 6000 | 4.6 | 4.6 | 4.6 |
| 125 | 6000 | 4.6 | 4.6 | 4.6 |
| 150 | 6000 | 4.6 | 4.6 | 4.6 |
| 200 | 12000 | 4.6 | 5 . 9 | 5.1 |
| 250 | 12000 | 4.8 | 5 . 9 | 5.7 |
| 300 | 12000 | 4.9 | 5 | 6.4 |
| 350 | 12000 | 4.9 | 5.1 | 7.5 |
| 400 | 12000 | 4.9 | 5.8 | 8.2 |
| 450 | 12000 | 5.3 | 6.2 | 8.9 |
| 500 | 12000 | 5.4 | 6.7 | 10 |
| 600 | 12000 | 6.3 | 7.6 | 11.3 |
| 700 | 12000 | 6.7 | 9.1 | 13.1 |
| 800 | 12000 | 7.2 | 10 | 14.6 |
| 900 | 12000 | 8.2 | 10.9 | 16.4 |
| 1000 | 12000 | 9.1 | 11.8 | 17.7 |
| 1200 | 12000 | 10 | 13 | 19 |
| 1400 | 12000 | 11.3 | 14.6 | 21.5 |
| 1500 | 12000 | 12.2 | 15.6 | 23 |
| 1600 | 12000 | 13.1 | 16.6 | 24.5 |
| 1800 | 12000 | 14 | 18.5 | 27.2 |
| 2000 | 12000 | 15.8 | 20.5 | 29.8 |
| 2100 | 12000 | 17.6 | 21 | 31.1 |
| 2200 | 12000 | 19.5 | 22 | 32.4 |
| 2400 | 12000 | 20.5 | 24 | 35.5 |
| 2600 | 12000 | 22.7 | 26.5 | 38 |
| 3000 | 12000 | 28 | 32.5 | 44.2 |
| 3200 | 12000 | 31 | 36 | 47.5 |
| 3600 | 12000 | 33 | 39.5 | 52.4 |
| 4000 | 12000 | 34.5 | 45.3 | 57.8 |
Engineering Mechanics Index of FRP/Composite Material (1)
| 1,Pipe | Â |
| Hoop tensile strength | 200~300MPa |
| Longitudinal tensile strength | 50~100MPa |
| Longitudinal flexural strength | 140MPa |
| Interlaminar shear strength | 50MPa |
| Crosslaminar shear strength | 60MPa |
| Hoop modulus of elasticity | 25GPa |
| Longitudinal modulus of elasticity | 12.5GPa |
| Shear modulus of elasticity | 7GPa |
| flexural E--modulus | 9.3GPa |
| 2,Fitting | Â |
| Tensile strength | 120-290MPa |
| Flexural strength | 210-410MPa |
| Compression strength | 130MPa |
| Tensile modulus of elasticity | 9.5GPa |
| Flexural E--modulus | 9.0GPa |
FAQ
Â
Q:Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products, FRP manufacturer in china.
Q: How about after-sales service?
A:Â 3Â year free warranty, Lifetime technical service support.
Q: How can i install the production line and get a commissiong?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.
We are looking forward to cooperate with you! If you are interested, kindly feel free to contact us!
 High Strength Fiberglass Duct GRP FRP Chimney Pipe
Our Advantage:
1), Engineers will be sent to your local to guide installation on client's required.
2), In order to save transport cost, JHR company can deliver production line and raw material to project local to produce pipes
3), OEM
4), Maintance and technical support will be supplied any time.
5), ASTM standard
6), Any non man-made damage parts can be supplied by us for free.Â
The Filament Winding Potable Water FRP Pipe takes thermosetting resin as base body, take glass fibre and its products as reinforced material.The process of adding silicon sand will adopts the pheumatic control.In addition ,the high frequency vibrator will be used to densify the silicon sand-adding layer,which can large improve the compactness of the silicon sand-adding layer ,as a result,the ring stiffness of pipe will be also improved effectively and at same time,the phenomenon of dry yarn or no yarn will not exist .The usage of silicon sand-adding device and process can not only improve the quality of pipe a lot but also decrease the cost. Under such case,the products will be strongly competitive in the market.
Typical Dimensions:
| DN | L | 0.6MPa | 1.0MPa | 1.6MPa |
| ( mm ) | ( mm ) | TH ( mm ) | TH ( mm ) | TH ( mm ) |
| 10 | 1800 | 4.6 | 4.6 | 4.6 |
| 15 | 1800 | 4.6 | 4.6 | 4.6 |
| 20 | 1800 | 4.6 | 4.6 | 4.6 |
| 25 | 1800 | 4.6 | 4.6 | 4.6 |
| 32 | 1800 | 4.6 | 4.6 | 4.6 |
| 40 | 6000 | 4.6 | 4.6 | 4.6 |
| 50 | 6000 | 4.6 | 4.6 | 4.6 |
| 65 | 6000 | 4.6 | 4.6 | 4.6 |
| 80 | 6000 | 4.6 | 4.6 | 4.6 |
| 100 | 6000 | 4.6 | 4.6 | 4.6 |
| 125 | 6000 | 4.6 | 4.6 | 4.6 |
| 150 | 6000 | 4.6 | Compression Fittings High pressure carbon steel with
zinc trivalent anti-corrosion coating per J514 standard. Flareless
compression tube fittings come fully assembled with tube Nuts and
ferrules. These fittings are used with hydraulic tubing that cannot or
does not need to be flared. Product Details Flareless Compression Tube
Fittings The male fitting has straight threads and a 24° seat. The
female connection uses a tube, tube nut, and bite-type sleeve. When the
tube nut is tightened the seal is made between the sleeve and 24° seat. A
seal is also made between the sleeve and the tubing. The threads hold
the connection mechanically. Compression Fittings,Tube Fittings,Branch Elbows,Branch Union Elbows Jiaxing Master Fitting CO.,LTD , https://www.jiaxingmaster.com |