How to avoid truck driving safety on rainy roads

Heavy rain is the most troublesome thing for truck drivers. Although it is said that “spring rain is expensive”, it is rainy and the road is slippery, causing vehicle accidents to occur frequently. There are frequent crashes, rear-end collisions, collision fences, and side accidents. However, when driving on highways on rainy days, rain will obstruct the sight of truck drivers. Rain sounds can also affect hearing. In addition, roads tend to accumulate water in rainy days, the friction is reduced, and the wheels tend to slip, affecting the braking effect. increase. Especially at night, due to the light reflected by the rain, the driver may be dazzled, making the sight of the driver greatly affected and easily inducing car accidents. How can we minimize the danger of driving? The following Xiaobian has compiled seven drivers' driving skills in rainy weather.

Trucks are easy to ski on a rainy day

In rainy days, due to the characteristics of wet and slippery roads, water accumulation, and low visibility, it is particularly pointed out that drivers of truck drivers who have to drive on highways in the rain should pay attention to the following points:

Check the condition of the vehicle carefully before driving, especially wipers, lights, tire pressure, vehicle braking, etc. And ensure that the sight is good, dry the reversing mirror, so that you can clearly observe the movement of the rear of the vehicle during driving. It is necessary to pay special attention to whether the air conditioning system can operate normally. It is directly related to traffic safety, because the rainy days are usually in a closed state. Due to the temperature difference between inside and outside, the glass is prone to fogging, which seriously affects the driver’s sight and must use an air conditioning system. Remove the fog. In addition, we must bring rain gear, reflective triangle cards, car repair tools.

If there is a thunderstorm, it is best to close the external antenna of the vehicle and do not use the mobile phone frequently to prevent it from being struck by lightning.

When driving on the expressway, we must pay attention to listening to the traffic information broadcast to check the road signs. Some road sections may be temporarily closed due to poor road conditions. Some road sections need to be re-routed, and these signs must be discovered in a timely manner. Make accurate judgments.

If heavy rain or heavy rain falls on the way, double flashes should be turned on in time, and you should leave the nearest exit or enter the nearest service area.

When driving a car, be sure to drive at a slow speed. When the visibility is low, turn on the lights. Do not use the brakes casually because the adhesion coefficient of the road surface during rainy days is greatly reduced. It is prone to skidding and traffic accidents.

To maintain a proper safety distance with the vehicle in front, light rain should not be less than 100 meters, and heavy rain should be no less than 200 meters.

In the event of a breakdown or traffic accident on a truck, the double flashing lights should be turned on immediately. A reflective triangle should be placed 150 meters away from the direction of the incoming vehicle. The personnel on the vehicle should quickly move to the outside of the guardrail, and then call the police to wait for the rescue. In addition, there is a situation where there is water accumulation on the road surface. The speed of the vehicle must be slowed down. It is better not to exceed 70 km/h and turn on the lights at the same time. When there is a place where there is water, do not use the brakes to avoid accidental skidding.

Remind the drivers that if you drive on a freeway on a rainy day, please pay attention to deceleration and reduce the speed by about 20%. Increase the distance between the vehicles by more than twice the distance between dry roads. Do not brake or struck the steering wheel to reduce the number of lane changes. Reduce speed when passing through ramps and corners.

Matting Agent For Elastic Coatings

Introduction:

Soft-touch coatings provide a unique feel, or haptic effect, to surfaces with natural characteristics that tend to be unappealing to most consumers, particularly plastics. They are widely used in interior automotive and consumer electronic applications, where manufacturers seek to provide a premium look and feel to differentiate their products from the competition.

Paint Silica Matting Agent is a very fine-grained precipitated silica as white powder.

Characteristics

High Matting Efficiency;

Excellent Transparency;

Easy to Dispersion;

Excellent Hand-feeling

Applications:

Soft felling coatings used for phone shell, laptop surface, household appliances, plastic electronics and so on.

Matting Agent For Elastic Coatings,Preciated Silica Matting Agent,Soft Feel Coatings Silica Matting Agent,Plastic Coatings Silica Powder

Guangzhou Quanxu Technology Co Ltd , https://www.inkjetcoating.com