In 2017, all 18 coal-fired power plants in Ningbo will achieve ultra-low emissions
June 15, Zhejiang, Ningbo, Mingzhou Thermal Power Co., Ltd. invested 65 million yuan to start the implementation of the existing three boilers flue gas desulfurization and denitration dust transformation. It is reported that the desulfurization efficiency of the project over 95%, dust removal rate exceeding 99.99%, higher than China's existing coal-fired power plant emission standards.
It is understood that dust emitted from coal-fired power plants will be combined with harmful gases such as sulfur dioxide, nitrogen oxides and other substances, causing some impact on the environment. Ningbo Mingzhou thermal coal-fired boiler using electric bag composite dust collector, dust emission concentration is less than 20 mg per cubic meter, the dust removal rate of 99.99%.
At present, Ningbo has a total of 5 provincial-level coal-fired power plants and 13 coal-fired thermal power plants. Among them, there are 24 units in 5 coal-fired power plants, including Beilun Power Plant, Ninghai Guohua Power Plant, Datang Usha Power Plant, Zhenhai Power Plant and Formosa Thermoelectric Power Plant. Among them, there are 13 units in Ningbo Economic Development Zone Thermal Power Plant, Mingzhou Thermal Power Plant and Guangyao Thermal Power Plant, Coal thermal power enterprises have 48 boilers. At present, in addition to the three thermoelectric enterprises to be relocated, other thermoelectric companies have implemented efficient desulphurization and denitrification facilities.
According to the target, it is planned that by the end of 2017, the concentration of sulfur dioxide in the flue gas of all steam-fired boilers (excluding layer burning furnaces and pulverizer furnaces) with a capacity of 65 tons / h or above in Ningbo should be less than 35 mg / m3 nitrogen Oxide emission concentration should be less than 50 mg / m3 and soot emission concentration less than 5 mg / m3. This means that in 2017, all 18 coal-fired power plants in Ningbo will achieve "ultra-low emissions."
The filter end caps have a variety of end cap types such as Dust Collector Filter End Caps, dust filter element cover, activated carbon filter element cover, oil filter element end caps, air filter element end caps, water filter element end caps, etc.
At the same time, it can also be divided into square filter end caps, round filter end caps, Open Round Filter End Caps, special-shaped filter end caps, and other types;
According to the material, it can be divided into galvanized filter end caps, aluminum filter end caps, stainless steel filter end caps, and anti-fingerprint filter end caps. etc.
If you don't know this aspect, don't worry, you just need to tell us your use environment and its requirements, and our professional team can make a recommendation that is most suitable for you.
FAQ
Q1: Are you a factory?
A1: Yes, we are a professional manufacturer of wire mesh products focusing on wire mesh for decades.
Q2: How can I get a quotation?
A2: You need to provide material, sheet size, wire diameter, hole distance, and quantity for inquiry. Special requirements can also be specified.
Q3: Is it ok if I want free samples?
A3: Yes, we can provide free samples in 20cm-50cm sizes along with our catalog. But the express fee will be on your account. If you place an order, we will refund the courier fee.
Q4: What's your payment term?
A4: Generally, our payment terms are T/T 30% advance payment, balance 70% against copy of B/L. We can also discuss other payment terms.
Q5: How about your delivery time?
A5: 1. We always prepare enough stock materials for your urgent needs, and the lead time for all stock materials is 7 days.
Depending on quantity and technology, exact lead times and production schedules for non-stock items will be communicated to you.
Filter End Caps,Dust Collector Filter End Caps,Filter End Caps For Dust Collector,Open Round Filter End Caps
Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewire.com