Truck Brake Drum 3524210401 Vehicle Spare Part for Benz
Benz Brake drum 3464230601-3464230001-3464230101-3464230501Â for truck/trailer/bus/truck parts
www.yadongbrakes.com
www.premiumbrake.com
Diameter [mm] 410
Brake Surface [mm] 132
Height [mm] 184
Pitch Circle [mm] 335
Hub Bore [mm] 298
Number of Holes 10
Bore [mm] 23
Weight [kg] 34,7
|
Diameter [mm] |
410 |
| Brake Surface [mm] | 132 |
| Height [mm] | 184 |
| Pitch Circle  [mm] | 335 |
| Hub Bore  [mm] | 298 |
| Number of Holes | 10 |
| Bore  [mm] | 23 |
| Weight [kg] | 34,7 |
Our products Advantage
1.Credibility of the enterprise;
 2.OEM quality standard guaranteed;
 3.Sample purpose order accepted;
 4.Standard materrial according to technical drawing;
 5.Able to produce according to specification with technical drawing;
 6.Positive customer feedback from domestic and international market.
If you are interested in that feel free to contact to me.Hope we can cooperate with you in the future.
www.yadongbrakes.com
In additional ,we can produce the new products according to your drawing or samples in a short time .
1) good quality;
2) competitive price;
3) Quality Control and OEM service
4) professional experience and good after-sales service;
Our products Scope
 We are manufacturer specializing in all typical brake drums for trucks such as SCANIA / VOLVO / MERCEDES BENZ / BPW / RENAULT / DAF / MAN/ STYER HOWO / IVECO / KAESSB OHRER / KESSLER / MAZ / SAUER SAF / ROR / TRAILER / GUNTE WEBB / KIC / FUWA / NIHO / NISSAN / JAPAN / MITSUBISHI FOSO / YORK / FRUEHAUF/Others
(1)Product Specifications
|
 Material |
i)  alloy cast irons, gray iron, Ductile iron parts (G3000, G3500, GG20, GG25,GG30, GG35, GGG40, GGG50 and GGG60 15%Cr-Mo, L-NiCuCrl562.1563) , ii) grey high-carbon cast iron iii) high-silicon,high carbon contents |
|
     Weight |
30-70 kg |
|
Chemical   composition |
C: 3.35-3.7% Si: 1.3-2.1% Mn:0.5-1.05% P ≤ 0.12%  S: ≤ 0.10% |
|
  Casting Charactor |
FQ and diameter Per client's requirement |
|
    Design |
Technical expert take in charge of making drawings for the samples offered by clients As the customer drawing.As the ustomer sample. |
|
  Test requriment |
Each piece should be strictly tested, Eg. Blance Test, Round Jumpness Test |
|
  Mechnical property |
tensile strength>255N/mm2  degree of hardness:197-241HB  |
|
  |
 |
|
     Packing |
Inner packing: Wooden pallet, 16/20 pcs wrapped film Outer packing: Steel rope with16/20 pcs wrapped Film Wood pallet & Waterproof membrane,As the customer requirement |
Fittings and Parts of Crushing Machines
There are several fittings and parts commonly found in crushing machines, including:
1. Jaw Plates: These are the main wear-resistant parts of the crushing machine. They are fixed on the jaw body and provide the crushing surface for the material.
2. Toggle Plates: These plates are connected to the toggle beam and help in adjusting the opening of the crusher. They also protect the machine from overloading.
3. Eccentric Shaft: This is a critical component that provides the rotational motion to the jaw crusher. It is usually made of high-grade forged steel and is responsible for transmitting the crushing force to the material.
4. Flywheel: The flywheel is a heavy metal wheel attached to the eccentric shaft. It helps in maintaining the momentum of the crushing machine and reduces the load fluctuations during the crushing process.
5. Bearings: Bearings are used to support the rotating components of the crushing machine, such as the eccentric shaft and the flywheel. They ensure smooth operation and reduce friction.
6. Crushing Chamber: The crushing chamber is the space between the fixed jaw plate and the movable jaw plate. It is where the actual crushing of the material takes place.
7. Wedges: Wedges are used to adjust the gap between the fixed and movable jaw plates. They help in controlling the size of the crushed material.
8. Springs: Springs are used to provide the necessary force for the jaw plates to return to their original position after crushing the material.
9. Belt and Pulley System: This system is used to transmit power from the motor to the crushing machine. It consists of a belt connected to the motor and pulleys attached to the flywheel and eccentric shaft.
10. Guard Plates: Guard plates are used to protect the crushing machine from damage caused by foreign objects or excessive wear.
electrical crusher fittings, crushing fittings, crusher fittings
SiChuan TieYing Machinery Manufacturing CO.,LTD; , https://www.tieyingcrushers.com