Water valve installation instructions

Water valve installation instructions: 1: automatic water valve can be installed horizontally or vertically, but not upside down, that plastic knob can not be in the upper part. 2: Watch the outlet pressure gauge, adjust the top of the hexagonal nut until the desired system pressure to run 3 : It is recommended that the pressure setting of automatic water filling valve is higher than the static pressure 0.3 kg, but the setting value needs to be lower than the water replenishing pressure, otherwise, the water can not be replenished normally. 4: Automatic water filling valve automatically injects water to set pressure, If you need to interrupt the automatic replenishment, you can manually shut off the automatic valve on the valve. 6: If the spool dirty replaceable or cleaning spool More ... Keywords:

Braided Hose

Braided Hose is one of high pressure hose and Hydraulic Hose as well, and inculde one wire braided hydraulic hose and Two wire braided hydraulic hose ,which they are SAE 100R1 hose,SAE 100R2AT hose,EN853 1SN hose,EN857 1SC hose,EN 853 2SN hose,EN857 2SC hose,pilot hose,SAE 100R16 and SAE 100R17.Wire Braided Hose consists of oil resistant synthetic rubber for inner tube,one or two braideds high tensile steel wire for reinforcement,and weather resistant synthetic rubber for cover.This flexible hose is suitable for petroleum-based and water-based hydraulic fluids in hydraulic lines working in the temperaute of - 40 ℃ to + 100 ℃ ;-40℉ to + 212℉.This hydraulic pipe is made of special synthetic rubber and has excellent oil resistance,heat resistance and aging resistance,high working pressure,superior pulse performance ,excellent bending resistance and fatigue resistance.This Rubber hose pipe is soft to use and deforms little under pressure.

Braided Hose,Hydraulic Tubes,Sandblasting Hose,Wire Braided Hydraulic Hose

Luohe Tiema Hydraulics CO.,Ltd , https://www.hydraulichosesdirect.com