(1) The ore must be uniform and the product size meets the requirements.
(2) Pay attention to the operation of the mining and transportation belts at any time to avoid blockage accidents.
(3) Always check the oil pump Cooler, filter and oil return temperature, the return oil temperature should not exceed 60 °C.
(4) Check the water-tight drainage of the water seal. If there is no water, it is not allowed to operate.
(5) Pay attention to check the oil pressure of the lock cylinder. The adjustment ring must be operated under the locked state.
(6) Regularly check the wear of the lining plate, pay special attention to the lining plate fixing bolt on the adjusting ring. If it is loose, it will cause the lining plate to loosen. The newly changed liner should be fastened once after 24 hours of work.
Outside Assembly Flat Press Production Line
Outside Assembly Flat Press Production line is one new technology machine with high efficiency than inside assembly especially produce less than 2000mm insulating glass.Machine inclue Feeding section,washing and drying section,storage section,aluminum put section,outside assembly section,press section and output section.
Double And Triple Glass Machinery,Advanced Insulating Glass Production Line,Ce &Iso-9001 Approved Insulating Glass Machine,Low-E Insulating Glass Production Line
JINAN WEILI MACHINE CO LTD , https://www.wgmglassmachine.com