32L Clean Room Vacuum Cleaner

The ECW-1032W is a clean room vacuum cleaner with a 32L barrel capacity. The upper and lower airway separation design is adopted for heat dissipation, and the path and time of the exhaust air are extended, so the sound generated is smaller than that of the ordinary vacuum cleaner, and the small and exquisite use is also simple, and the area cleaned every hour can reach 600 square meters. He has a wide range of uses and can be used in industrial laboratories, dust-free workshops, purification workshops, or in office environments where ordinary commercial enterprises have strict air index requirements.

Specification:
 
Features:
1. The whole plastic part of ECW-1032W is made of modified PP material. The improved ability to resist heavy impact is enhanced, so the durability of the product will be extended.
2. The wind inlet adopts the turbine type cyclone design, which reduces the air resistance when the vacuum cleaner sucks the dust into the barrel, so that the airflow entering the barrel at a high speed is smooth, thereby enhancing the suction force.
3. The heat dissipation adopts the upper and lower air passage separation design, which can completely isolate the hot and cold air and reduce the temperature rise of the motor, so that the vacuum cleaner motor can maintain the constant temperature state for a long time. This design prolongs the use time of the machine and makes the noise generated small. .
4, the filter system has a total of 4 layers: the first layer is a paper bag, the second layer is a PET4800 filter, refined with a polyester film material, the third layer of motor exhaust vents PET2400 filter, using spunlace The filter combined with the woven fabric and the composite filter material can filter the carbon brush ash and the residual fine dust, and the fourth layer is the fixed point vent filter cotton, and the air discharged after the four layers of filtration is clean.
5, the artificial mechanics design handle can be easily lifted to move.
6. The upper cover adopts the CAD under cover design, which prevents water from entering the motor from the upper part of the machine during use, causing the machine to malfunction.
7. The dust collecting bucket is made by one-time injection molding. There are no screws in the barrel, which is smooth and easy to clean. The barrel capacity can reach 20L.
8. The female connector is movable and equipped with a maintenance ring. The hose is not easy to be knotted when it is used. When the female connector is blocked, it is only necessary to rotate the maintenance ring to divide the female connector into 2 parts, and the plug can be easily cleaned; The hose is a nylon hose that is strong and durable.
9. The front small wheel is a universal wheel, which is light, flexible and convenient when moving.
10, with a variety of dust removal accessories, can clean dust or garbage in a variety of environments; standard paper bags or cloth bags to facilitate the disposal of garbage after cleaning, also used to collect waste materials into paper bags or bags and reuse.
11, the key component motor warranty for 2 years; this machine can not absorb water.

Applications:
It is mainly used in industrial laboratories with a purification level of 1000, dust-free workshops, purification workshops, etc., and can also be used in conjunction with other products. It can also be used to collect waste materials and collect them again. It can also be used. Ordinary commercial enterprises have strict office environments for the air index.
  The ECW-1032W is a clean room vacuum cleaner with a 32L barrel capacity. The upper and lower airway separation design is adopted for heat dissipation, and the path and time of the exhaust air are extended, so the sound generated is smaller than that of the ordinary vacuum cleaner, and the small and exquisite use is also simple, and the area cleaned every hour can reach 600 square meters. He has a wide range of uses and can be used in industrial laboratories, dust-free workshops, purification workshops, or in office environments where ordinary commercial enterprises have strict air index requirements.

Specification:
 
Features:
1. The whole plastic part of ECW-1032W is made of modified PP material. The improved ability to resist heavy impact is enhanced, so the durability of the product will be extended.
2. The wind inlet adopts the turbine type cyclone design, which reduces the air resistance when the vacuum cleaner sucks the dust into the barrel, so that the airflow entering the barrel at a high speed is smooth, thereby enhancing the suction force.
3. The heat dissipation adopts the upper and lower air passage separation design, which can completely isolate the hot and cold air and reduce the temperature rise of the motor, so that the vacuum cleaner motor can maintain the constant temperature state for a long time. This design prolongs the use time of the machine and makes the noise generated small. .
4, the filter system has a total of 4 layers: the first layer is a paper bag, the second layer is a PET4800 filter, refined with a polyester film material, the third layer of motor exhaust vents PET2400 filter, using spunlace The filter combined with the woven fabric and the composite filter material can filter the carbon brush ash and the residual fine dust, and the fourth layer is the fixed point vent filter cotton, and the air discharged after the four layers of filtration is clean.
5, the artificial mechanics design handle can be easily lifted to move.
6. The upper cover adopts the CAD under cover design, which prevents water from entering the motor from the upper part of the machine during use, causing the machine to malfunction.
7. The dust collecting bucket is made by one-time injection molding. There are no screws in the barrel, which is smooth and easy to clean. The barrel capacity can reach 20L.
8. The female connector is movable and equipped with a maintenance ring. The hose is not easy to be knotted when it is used. When the female connector is blocked, it is only necessary to rotate the maintenance ring to divide the female connector into 2 parts, and the plug can be easily cleaned; The hose is a nylon hose that is strong and durable.
9. The front small wheel is a universal wheel, which is light, flexible and convenient when moving.
10, with a variety of dust removal accessories, can clean dust or garbage in a variety of environments; standard paper bags or cloth bags to facilitate the disposal of garbage after cleaning, also used to collect waste materials into paper bags or bags and reuse.
11, the key component motor warranty for 2 years; this machine can not absorb water.

Applications:
It is mainly used in industrial laboratories with a purification level of 1000, dust-free workshops, purification workshops, etc., and can also be used in conjunction with other products. It can also be used to collect waste materials and collect them again. It can also be used. Ordinary commercial enterprises have strict office environments for the air index.
 

The SP Sump Slurry Pump is designed for coal preparation, chemical handling, minerals processing ,sand and gravel and general tank, pit or hole-in-ground slurry applications. The cantilever design makes the SP sump pump ideally suited for heavy continuous handling of abrasive, coarse grained particle and corrosive liquids and slurries while submerged in sumps .They can also work normally under intermittent feeding. The wet parts are designed with hard metal, so offer you reliability and long wear life.

Product Feature

1.Vertical, centrifugal and single casing structure.

2.The Impeller is double suction half-open structure, is made of wear-resistant alloy.

3.No submerged bearings or packing.

4.Available in various standard lengths to suit common sump depths, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump.

5.Three type construction of the pump inlet: standard type with strainer, suction pipe with strainer,with agitator.

6.Direct drive, V-belt drive could be selected to connect with the drive.

SP Sump Slurry Pump

SP Sump Slurry Pump,Lengthening Sump Slurry Pump,Vertical Centrifugal Sump Slurry Pump,Single Casing Sump Slurry Pump,Metal Sump Slurry Pump

Shijiazhuang Soarho Machinary Co.,Ltd , http://www.xhslurrypump.com