Pet Recycling Machine/Pet Flake/Chip Washing Line/Pet Bottle Recycling Plant

June 17, 2018

  • Model NO.: PET-1500
  • Plastic Type: PET
  • Automation: Automation
  • Certification: ISO9001:2008, CE
  • Power(W): 260kw
  • Final Product: Cleasn Pet Flakes
  • Weight: 5-10t
  • Motor/PLC: Siemens
  • Warranty: 12 Month
  • Transport Package: Regular Seaworthy Packing
  • Origin: China
  • Material Processed: Plastic Bottle
  • Screw: Single-Screw
  • Computerized: Computerized
  • Production Capacity: 500-6000kg/H
  • Humidity: Less Than 1.5%
  • Voltage: 380V
  • Delivery Time: 30 Working Days
  • Converter: ABB
  • Trademark: KWELL
  • Specification: 3800*1400*2300mm
  • HS Code: 8477800000
PET Recycling Machine/PET flake/chip washing line/Pet Bottle Recycling Plant

Machine Brief info:
Generally refers to the use of PET bottles, after appropriate processing, reduction of material PET, for then made products, especially as the chemical fiber textile materials greater amount. As the PET bottle is widely used in beverage, food oil, due to health reasons, can only be used once, equipment so the recycled PET bottles have to attention. The bottle cap, bottle separation PET bottles on the drag is PE, can also be centralized treatment and recovery. 
 
1. Plastic recycling washing machine is applied in PET waste bottle or sheet recycling field.

2. Through crushing, washing and dry process, the waste bottle or sheet will become to be bottle flakes. The flakes are widely used in plastic industry, like sheet, and profile production. 

3. The clean flakes can be used to produce the polyester staple fiber, PET strap band, granules, PET transparent film and sheets, etc. The top class flakes can be used to blow bottles again.

4. Recycling machine can be designed on the basis of how dirty the flakes are, and make sure of the quality of the final products are very clean.

5. Recycling machine output we can supply is from 500kg/h to 6000kg/h.
   
Machine Technical Characteristics:
1. Final Recycled PET Flake Quality Standard: 
Index Parameter
PET flake size 8~12 mm
Moisture < 1.5 %
Viscose < 20 ppm
PP/PE < 20 ppm
Metal < 20 ppm
Other color PET flake < 30 ppm
Label < 20 ppm
PVC < 30 ppm
Total impurities < 100 ppm
PH neutral
Bulk density 0.3g/cm3
 
2. Estimated Plant Parameters:
Capacity(kg/h) Installation Power(kw) Required Area(m2) Manpower
500 220 600 8
1500 430 800 12
3000 650 1000 18
6000 1000 1400 30

Machine Process Flow Introduction:
Bottle bales→Bale Opening→Trommel Filtering→Label Removing→Bottle Pre-washing→Manual Sorting→Wet Crushing→Floating Washing→Drying→Hot Flotation Washer→Drying→Continuous Friction→Continuous Floating Washing→Drying→Label&Dust remover→Flake Optical Sorting→
Packing→Clean Flakes

Machine Equipment List:
De-laber Bottle bale opening 
Belt conveyor Put the material on the moving belt, which will convey the bottle into label remover
Trommel Removing rock, stone, dust, loosen caps and small metals, especially, the iron will be removed by high speed
Bottle label separator Removing labels from bottles
Manual Select working table IF the label still in the bottle, worker can remove the label by hand
Crusher Crush the material
Screw loader Put the flakes into the Hot washer to clean
Floating washer Cleaning flakes to remove chemicals and separating out rest labels and caps 
Hot washer Connected with steam boiler. Steam is supplied into washing tank to heat water and flakes. Hot water makes waste; label and glue loosen from bottles
Friction washer After crushing material from enters the mouth, through the high speed on the axis of the blade flap and spray water to the common function of good cleaning effect
Centrifugal dryer Rejection the water from the flakes, moisture content is less than 2%
Pipe drying system Hot air drying
PVC(label) separator Used for the PET bottles, round and pressed bottles,effective more than 98%,save energy and labor,without water
Storage bunker Storage materials

Machine photos as a reference:
Pet Recycling Machine/Pet Flake/Chip Washing Line/Pet Bottle Recycling Plant
Pet Recycling Machine/Pet Flake/Chip Washing Line/Pet Bottle Recycling Plant
Pet Recycling Machine/Pet Flake/Chip Washing Line/Pet Bottle Recycling Plant
Pet Recycling Machine/Pet Flake/Chip Washing Line/Pet Bottle Recycling Plant
Machine Packing details:
Pet Recycling Machine/Pet Flake/Chip Washing Line/Pet Bottle Recycling Plant
Working process:
Pet Recycling Machine/Pet Flake/Chip Washing Line/Pet Bottle Recycling Plant
About our service:
PET Bottle washing line Before-sale  
  1. Introduce products and applications detain
  2. Recommend suitable solution
  3. Provide with reference information
  4. Offer lab for test    
During Manufacturing          
  1. Provide with layout and engineering conditions
  2. Inform the project processing status
  3. Offer other documents
After-sale:
1. Provide with installation, commissioning and training
2. Register and record customer information
3. Offer spare parts
4. Provide with necessary technical support for new application
5. Visit customer regularly and correct information

Why choose us:
1. Lower investment cost for a high quality and durable machine; 
2. Low energy consumption with high production output;
3. Overseas installation and training are available;
4. Machine warranty with spares in stocking and in-time delivery;
5. Fast machine delivery and installation: KWELL produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers. The regular delivery time of an KWELL recycling machine is 30 days.
 
Please convenient yourselves by me !!
http://kwellgroup.en.made-in-china.com/

Back to top