Model NO.: A Station Mold
Milling Speed: Normal Speed
Parts Detection Method: Geometric Detection
Size: Free
Trademark: ALUKE
Specification: CE Standard International Standard
Origin: China
HS Code: 848020
Model NO.: A Station Mold
Milling Speed: Normal Speed
Parts Detection Method: Geometric Detection
Size: Free
Trademark: ALUKE
Specification: CE Standard International Standard
Origin: China
HS Code: 848020
We can supply the Punching Die of different series, suitable for:
AMADA, MURATA, TRUMF, STRIPPET, LVD, FIN POWER, JIN FANGYUAN, YANGLI, JIEMAI IN JINAN, TAILIFT and so on punch machines.
We have customers over world, such as UK, USA, Italy, Romania, Russia, Ukraine, Brazil, Colombia, Peru, Venezuela, Ecuador, Paraguay, Chile, India, Pakistan, Singapore, Vietnam, Iran and so on, more than 50 countries.
If you need any of these items, welcome to ask us.
Special Features:
Shaping mode: Punching die
Materials: SKH51, SKD11, ASP23, M42
Hardness: 60+2HRC, determined by material
Service: Made to order
Marking: Up to requirements
Machine type: Punching machine
Precision mold punch and button die in various shapes with made to order service and different standards
Just-in-time manufacturing capability to meet customers requirement
Tailor-made packaging method according to customers requirement
To enable us to effectively quote your various punch needs, please provide complete specifications and prints where possible
QC system: 100% inspection on critical dimensions before shipment
Our company is a very professional manufacturer with rich experience,
Specilized in producing Punches, Ejector Pins and sleeves, DieButtons, Bushes, Ejector Punches, Drill Rods,
Ball Cages, Springs, Blocksets of many different standards
Like DIN, DAYTON, MISUMI, MOLLER, HASCO, DME, ISO, and none- standards
Besides, customized services availble here.
We can supply the Punching Die of different series, suitable for:
AMADA, MURATA, TRUMF, STRIPPET, LVD, FIN POWER, JIN FANGYUAN, YANGLI, JIEMAI IN JINAN, TAILIFT and so on punch machines.
We have customers over world, such as UK, USA, Italy, Romania, Russia, Ukraine, Brazil, Colombia, Peru, Venezuela, Ecuador, Paraguay, Chile, India, Pakistan, Singapore, Vietnam, Iran and so on, more than 50 countries.
If you need any of these items, welcome to ask us.
Special Features:
Shaping mode: Punching die
Materials: SKH51, SKD11, ASP23, M42
Hardness: 60+2HRC, determined by material
Service: Made to order
Marking: Up to requirements
Machine type: Punching machine
Precision mold punch and button die in various shapes with made to order service and different standards
Just-in-time manufacturing capability to meet customers requirement
Tailor-made packaging method according to customers requirement
To enable us to effectively quote your various punch needs, please provide complete specifications and prints where possible
QC system: 100% inspection on critical dimensions before shipment
Our company is a very professional manufacturer with rich experience,
Specilized in producing Punches, Ejector Pins and sleeves, DieButtons, Bushes, Ejector Punches, Drill Rods,
Ball Cages, Springs, Blocksets of many different standards
Like DIN, DAYTON, MISUMI, MOLLER, HASCO, DME, ISO, and none- standards
Besides, customized services availble here.
A crane mounted on a truck carrier provides the mobility for this type of crane. This crane has two parts: the carrier, often referred to as the Lower, and the lifting component which includes the boom, referred to as the Upper. These are mated together through a turntable, allowing the upper to swing from side to side. These modern hydraulic truck cranes are usually single-engine machines, with the same engine powering the undercarriage and the crane. The upper is usually powered via hydraulics run through the turntable from the pump mounted on the lower. In older model designs of hydraulic truck cranes, there were two engines. One in the lower pulled the crane down the road and ran a hydraulic pump for the outriggers and jacks. The one in the upper ran the upper through a hydraulic pump of its own.
Features of Truck Mounted Crane
1. The chassis is purchased from some domestic famous companies, such as China Dongfeng Automobile Company, China Dongfeng Motor Limited Company, China Dongfeng Automobile Limited Liability Company, FAW Jiefang, Sino Truck, Beiqi Foton Motor, Hualing Heavy-duty Truck, Northern Benz, Shaanxi Automobile, Jianghuai Automobile, and Jiangling Motors.
2. Advanced hydraulic pump system is adopted to enable our truck mounted crane to have properties of energy saving, high lift speed and high working efficiency.
3. It is designed with H-shaped outriggers with long span length. Each single outrigger can be adjusted.
4. Our truck mounted crane can be operated bidirectionally. It can rotate continuously, and can complete a 360 spin in clockwise or counterclockwise direction. The rotating speed and lift speed can be adjusted through manual accelerator.
5. The truck mounted crane can be equipped with cranes whose weight could be 1t, 2t, 3.2t, 5t, 6.3t, 8t, 10t, 12t, and 16t. Its arms could be retractable type or folding type, and can be designed to be two-section arms, three-section arms, and four-section arms.
6. It has properties of high power, fast speed, strong climbing capacity, high lift height, high working efficiency, and easy operation.
Performance of Truck Mounted Crane
Our truck mounted crane can be operated bidirectionally. It can rotate continuously, and can complete a 360 spin in clockwise or counterclockwise direction. The rotating speed and lift speed can be adjusted through manual accelerator.
Applications of Truck Mounted Crane
The truck mounted crane can do lifting work in fields, stations, ports, warehouses, building sites, factories, oil fields, and more.
Truck Crane
Truck Crane,Mobile Crane,Truck Mounted Crane,Boom Truck,Crane Trucks
Hubei Jiangnan Special Automobile Co. Ltd. , http://www.jttrucks.com