Russia develops new electron cyclotron energy up to 7 Meg

[China Instrument Network Instrument R&D] Recently, the High Current Electron Cyclotron Laboratory at Tomsk University of Technology in Russia developed a new electron cyclotron SEA-7 with an energy of 7 Meg.

The Tomsk University of Technology in Russia has developed more than ten models of electron cyclotrons. The power of the new electronic cyclotron SEA-7 consumes the same amount of energy, and the power of the older model PXB is doubled. Currently, three new electron cyclotrons have been used in foundry production in India, the United Kingdom, and Indonesia.

The new type of electron cyclotron can detect cracks and other defects in large-scale products. It not only scans and detects finished products, but also scans and inspects parts that are in the process of processing, thus ensuring that waste products can be avoided during the production stage. It can also be used to detect welding and casting strength. It can also be used in border defense and airport customs inspection systems, such as checking large transport vehicles and even entire trucks to detect the presence of drugs and flammable and explosive materials inside.

The current detection system based on the university's electron cyclotron technology has been put into use in the border areas of Malaysia and Singapore, the border areas of China and Kazakhstan, and Kyrgyzstan.

(Original title: Russia produces a new type of electron cyclotron)

Application of polyethylene wax
1. Dense color masterbatch and filling masterbatch. As a dispersant in the processing of color masterbatch, it is widely used in polyolefin masterbatch. It has good compatibility with polyethylene, polyvinyl chloride, polypropylene and other resins, and has excellent external and internal lubrication.
2. PVC profiles, pipes, composite stabilizers are used as dispersants, lubricants and brighteners in the molding process of PVC profiles, pipes, pipe fittings, PE.PP to enhance the degree of plasticization, and improve the toughness and surface smoothness of plastic products And it is widely used in the production of PVC compound Stabilizer.
3. The ink has good light resistance and chemical properties, can be used as a pigment carrier, can improve the abrasion resistance of paints and inks, and improve the dispersion of pigments and fillers. It has a good anti-settling effect. It can be used as a flattening agent for paints and inks. The product has good gloss and three-dimensional effect.
4 Wax products are widely used in the production of various wax products such as floor wax, car wax, glazing wax, candles, crayons, etc., to increase the softening point of wax products, increase their strength and surface gloss.
5. Cable material Used as a lubricant for cable insulation materials, can enhance the diffusion of fillers, increase the extrusion molding rate, increase mold flow, and facilitate demolding.
6. Hot-melt products It is used in various hot-melt adhesives, thermosetting powder coatings, road marking paints, marking paints, as a dispersant, has a good anti-settling effect, and makes the products have a good gloss and three-dimensional effect.
7 Rubber As a rubber processing aid, it can enhance the diffusion of fillers, increase the extrusion molding rate, increase the mold flow rate, facilitate demolding, and improve the surface brightness and smoothness of the product after the film is released.
8 Cosmetics Make products have a good gloss and three-dimensional effect.
9 Injection molding, saving machine power lubrication, and enhancing the surface gloss of products