Water Curtain Spray Booth for Car Painting and Baking Cabinet

June 17, 2024

After-Sales Service Provide: Engineers Available to Service Overseas
Power: 50-60Hz
Size: Customized
Color: Customized
Trademark: Anyuan
Transport Package: Container
Specification: Customized
Origin: Jiangsu
HS Code: 8424300000
Product Description
Automotive paint room
1. Has patent
2.Can customized
3.Minimum running costs, reliability
Warranty:1 year,free spare parts in warranty period time.
 
Model Anyuan-001
Outside Size(mm): 8050*5250*6500
Inside Size(mm): 6920*3820*2600
Front Door(mm): 3030(W)*2600(H)
Total Power: 17kw
Cabin System Wallboard EPS colorful steel skin board,
wall panel: 60mm thick,
ceiling panel: High quality galvanized steel;
door use sheet metal process,;
safety door use heat preservation panels;
four corners: special aluminum alloycolumne
Basement: full grids, galvanized steel sheet construction, three embossed steel ramp ,height 300mm
Intake and exhaust fan system Intake type:back upper
Fan: 7.5KW,
Room material: aluminum frame, Inner galvanized sheet, out color-coated sheet.
Air supply duct: High quality galvanized steel
Wind speed:≥0.25m/s
ventilation door use cylinder, Automatic switch.
Filter system Inlet air filter use Initial effect filtration cotton
, can capture more than 10 μm particles;
Top air supply: Medium effect filter cotton, can capture medium effect filter cotton; grilling air exhaust use great Glass fiber cotton;has differential pressure meter.
Heating system Italy riello burner,max heating capacity is 180000kcal, the heat exchanger adopts stainless steel plate argon arc welding. Air inlet with mechanical temperature controller
lighting Upper ceiling light use 8 units 4*30 tube,side light use six units 30KW*4,
Total illuminance ≥1000ux.
Electrical control system Use ULor CE certificated good electrical component.
Major loop with multiple protection,equipped with lighting switch,temperature time setting,normal spray painting,thermostatic spray-painting baking switch,emergency stop,breakdown alarm,etc. Wall hanging type control cabinet
 
Model Anyuan
Outside Size(mm): 8050*5250*6500
Inside Size(mm): 6920*3820*2600
Front Door(mm): 3030(W)*2600(H)
Total Power: 17kw
Cabin System Wallboard EPS colorful steel skin board,
wall panel: 60mm thick,
ceiling panel: High quality galvanized steel;
door use sheet metal process,;
safety door use heat preservation panels;
four corners: special aluminum alloycolumne
Basement: full grids, galvanized steel sheet construction, three embossed steel ramp ,height 300mm
Intake and exhaust fan system Intake type:back upper
Fan: 7.5KW,
Room material: aluminum frame, Inner galvanized sheet, out color-coated sheet.
Air supply duct: High quality galvanized steel
Wind speed:≥0.25m/s
ventilation door use cylinder, Automatic switch.
Filter system Inlet air filter use Initial effect filtration cotton
, can capture more than 10 μm particles;
Top air supply: Medium effect filter cotton, can capture medium effect filter cotton; grilling air exhaust use great Glass fiber cotton;has differential pressure meter.
Heating system Italy riello burner,max heating capacity is 180000kcal, the heat exchanger adopts stainless steel plate argon arc welding. Air inlet with mechanical temperature controller
lighting Upper ceiling light use 8 units 4*30 tube,side light use six units 30KW*4,
Total illuminance ≥1000ux.
Electrical control system Use ULor CE certificated good electrical component.
Major loop with multiple protection,equipped with lighting switch,temperature time setting,normal spray painting,thermostatic spray-painting baking switch,emergency stop,breakdown alarm,etc. Floor control cabinet,Frequency conversion device.
Enhanced curing system Blow from top side, send hot strongly, power of intake fan is 2.2KW,air thru secondary filtration.
 
 
We specialize in the whole line:

1) Pre-treatment system: Automatic Spraying pre-treatment and dipping pre-treatment are available;
Automatic Powder Coating Line for Metal Products

2) Drying oven: Drying oven which drying the water after pre-treatment is designed according to customers' actual conditions.

3) Powder coating spray system: Automatic spray reciprocator, manual spray equipment and Semi-auto (Auto-spraying with manual repairing spraying) are for your choice;

4) Powder recycling system: Cyclone equipment and cartridge filters is customized and introduced according to actual requirement by customer;
Automatic Powder Coating Line for Metal Products

5) Curing oven: Tunnel curing oven, bridge type curing oven, Electric power heating curing oven, Gas-heating curing oven, Diesel heating curing oven, High temperature, lower temperature curing oven is available for fitting your sole factory.

6) Conveying system: Various design according to different requirement by customer on the basis of customers' workpiece and output information.
Automatic Powder Coating Line for Metal Products

7) Control system: PLC control, with or without touch screen

8) Spray gun and reciprocator
Automatic Powder Coating Line for Metal Products

Our service:
1. Purchase Service
Anyuan COATING has a specialized and efficiency working team. If you are new on the coating, some pictures or drawings of your products and workshop could be show to us will be appreciated , we will give you specialized suggestion of whole work .
2. Shipping Service
Anyuan COATING has a specialized and independent department which just for shipping the buyer's goods .The workers know T/T, L/C Items well. All Exported documents could be made perfectly . We cooperate with the most famous shipping company in China also. They could provide the best and economic shipping ways to the buyer's port.
3. Installation Service
Installation Service is available with all our machines. Anyuan COATING will dispatches technician to the Buyer's factory to install and trial operate the equipment.
4. Clients' Training Service
Anyuan COATING can accept the buyer send their own technician to our factory to learn how to operate machines. Also, training in the installation period is better acceptable.
5. After Sales Service
We provide one year warranty period.
Many spare parts will be prepared in the tool box together with machines.

Our company:
Water Curtain Spray Booth for Car Painting and Baking Cabinet

           Yangzhou Anyuan Coating Machinery Co., Ltd. was founded in 2004, registered capital of 20 million, is a professional company of various type of coating equipment and powder coating. Our aim is to produce better products and provide satisfactory service.
           Our company has excellent design, production, R & D capability and rich technical experience, high-quality technical personnel, professional service team. .
           Our main products are: electrostatic spraying equipment, automatic lift, through the spray pretreatment equipment, dipping device, processing type water curtain spray booth and water jet spray chamber, dry spray chamber, electrostatic coating chamber, electric heating, fuel, gas, coal fired hot air drying furnace, automatic control system, blasting PLC cleaning cleaning equipment, cathode electrophoresis equipment, advanced auto spray booth, transportation equipment, environmental protection equipment, coating equipment and all kinds of thermosetting powder coatings.
 

Fumed Silica

Fumed Silica,Micro Silica,Aerosil Fumed Silica,Aerosil Silica

Henan Minmetals East New Materials CO. LTD. , https://www.eastfumedsilica.com

Back to top