Before introducing the installation steps of the gas alarm, understand the concept of the gas alarm. The gas alarm is a gas leak detection alarm device. When the gas leaks in the industrial environment and the gas alarm detects that the gas concentration reaches the critical point set by the explosion or poison alarm, the gas alarm will issue an alarm signal to remind the staff to take safety measures. The gas alarm is equivalent to automatic Fire extinguishers, etc., can be installed to drive exhaust, cut off, and sprinkler systems to prevent explosions, fires and poisoning accidents, thereby ensuring safe production. The gas alarm can measure various gas concentrations. Often used in chemical plants, oil, gas stations, steel plants and other places with gas leakage.
Installation steps of gas alarm
installation method
At the selected wall position, mark the punch holes corresponding to the two mounting holes on the random mounting board (the hook on the board should be level upwards);
Make a mounting hole, put a random installation rubber plug, and then fix the mounting plate on the wall with a random self-tapping screw;
Align the three holes on the back of the body with the fixing hooks on the mounting plate, and hang the body.
After connecting the relevant output signal wires, turn on the power.
Status test
Normal monitoring status: 3 minutes after power-on and warm-up, the green light is steady, indicating that the alarm is working normally in the monitoring state; during the warm-up process, the alarm may emit a beep ... normal.
On-site alarm status: When the gas content in the air around the alarm exceeds the alarm point, the alarm will emit “beep…â€â€¦ intermittent tinnitus, and the red indicator light flashes, reminding the user to do on-site processing as soon as possible; alarm output status: on-site sound and light After the alarm lasts for 10 seconds, different types of alarms will output different types of alarm signals to notify the alarm system or start the corresponding linkage device.
TRANTER Heat Exchanger Gaskets
Tranter is a manufacturer of plate heat exchangers. Sweden SWEP company by a group of dedicated corrugated plate research thermal technical elite was founded in 1983, 1994, SWEP company and the United States plate heat exchanger manufacturer TRANTER company and Sweden REHEAT company merged, its parent company DOVER Group ranked 427 in the world. Main products: Brazed type and Gasket type plate heat exchangers, more than 60 kinds of product specifications, can well meet the various needs of users.
Tranter is a global manufacturer of sealed and welded plate heat exchangers based in the United States and an aftermarket service provider to the plate heat exchanger industry.
As the world's leading plate heat exchanger plate manufacturer and seller, Baode has a wide variety of domestic plate heat exchanger plates, more models! It can provide all common types of plate heat exchanger plates from well-known brands at home and abroad (including: AlfaLaval /GEA, TRANTER, SONDEX/HISAKA/APV/Thermowave /Schmidt/FUNKE/VICARB/LHE, etc.).
Tranter Heat Exchanger Gasekts,Tranter Plate Heat Exchanger Gasekts, Seal Flat Rubber Gaskets
Jiangsu Baode Heat-Exchanger Equipment Co.,LTD , https://www.baodehex.com